Jenn came out and helped me rivet the UAT antenna doubler and install the antenna.
I fabricated the antenna cable and installed it. It routes along the bulkhead and then…
up to the stringer and forward to the receiver. I also installed the power, ground and serial lines.
Finally, I fired it up and was able to get weather even sitting in my garage. I only waited long enough to let the regional weather load, but you can see the storms out to the north 100-200 miles away. You can see in the lower left corner that the regional weather is 4 minutes old and it’s still receiving. With this done, I’m finished with the avionics (for now at least).