5 Fuselage: December 2011 Archives
I trimmed the edges of the large aluminum area washers that surround the vent tube ports on the side of the fuselage. I then primed and installed them
Finally, I covered the oil cooler plenum and butterfly valve with packing tape so that I can layup some fiberglass over it. Because of the compound curves of the mold, I had to use a number of narrow strips to avoid wrinkles.
Finally, I covered the oil cooler plenum and butterfly valve with packing tape so that I can layup some fiberglass over it. Because of the compound curves of the mold, I had to use a number of narrow strips to avoid wrinkles.
