Finished Skinning Wings

By Jason on November 26, 2011 11:58 PM | Permalink | Comments (0) | TrackBacks (0)

Andre stopped by again today (we both had the whole week off work) and helped me rivet the bottom skins on the left wing. We learned a few lessons on the right wing and were able to knock these out in only about five hours. The only thing that was a little more complicated on this wing was the pitot tube mount, but it wasn't too bad.

« Installed Aileron Pushrod Boots and Gemini Pitot Tube | Main Index | Archives | Installed Pitot Tube and Nutplates on Tank and Root Ribs »

0 TrackBacks

Listed below are links to blogs that reference this entry: Finished Skinning Wings.

TrackBack URL for this entry: http://www.jasonbeaver.com/mt/mt-tb.cgi/692

Leave a comment

This page contains a single entry by Jason published on November 26, 2011 11:58 PM.

Installed Aileron Pushrod Boots and Gemini Pitot Tube was the previous entry in this blog.

Installed Pitot Tube and Nutplates on Tank and Root Ribs is the next entry in this blog.

Find recent content on the main index or look in the archives to find all content.