Trimming Baffles

By Jason on September 5, 2011 11:22 PM | | Comments (0) | TrackBacks (0)
No pictures tonight, but I went through a few iterations trimming the baffles.  The cowl is quite a bit lower, but still not all the way down.  I probably have at least 1/2" to go if not more.

I also started trimming the ramps.  I have no idea why they give you so much extra material; you have to cut quite a bit of it off before you can even start bringing the lower cowl up into place.

Categories:

« Resumed Work on Baffles | Main Index | Archives | Ramp Crossing Bends and Instrument Panel Prep »

0 TrackBacks

Listed below are links to blogs that reference this entry: Trimming Baffles.

TrackBack URL for this entry: http://www.jasonbeaver.com/mt/mt-tb.cgi/635

Leave a comment