Installed Real Vertical Power VP-X Pro

By Jason on September 28, 2011 11:31 PM | | Comments (0) | TrackBacks (0)
I started running through the VP-X install checklist.  I verified all device power lines and VP-X ground lines.  I also confirmed all switches ground properly.  Afterward, I removed the VP-X Pro blank box and installed the actual VP-X Pro box.



After hooking up all of the connectors, I threw the master switch and verified the VP-X powers up.  These are the lights on the ethernet jacks.



Categories:

« Avionics Power Wiring | Main Index | Archives | Configured VP-X and SkyView »

0 TrackBacks

Listed below are links to blogs that reference this entry: Installed Real Vertical Power VP-X Pro.

TrackBack URL for this entry: http://www.jasonbeaver.com/mt/mt-tb.cgi/652

Leave a comment