Finished Exterior Lighting Ground
I got an order from Aircraft Spruce today with some 14AWG black wire for the ground wire that ties the tail and wing wires together and runs up to the firewall.
The adhesive zip-tie base that attached the end of the tailcone conduit had fallen off, so scuffed everything up and used some E6000 adhesive to anchor the base to the side wall. There is no way this is coming off now.
The adhesive zip-tie base that attached the end of the tailcone conduit had fallen off, so scuffed everything up and used some E6000 adhesive to anchor the base to the side wall. There is no way this is coming off now.
0 TrackBacks
Listed below are links to blogs that reference this entry: Finished Exterior Lighting Ground.
TrackBack URL for this entry: http://www.jasonbeaver.com/mt/mt-tb.cgi/613
Leave a comment