Installed Fuel Pump

By Jason on April 9, 2011 11:56 PM | | Comments (0) | TrackBacks (0)
The fuel pump needs to be spaced up off the floor a little bit because of the nutplates and protruding screws on the bottom of the fuel pump mounting plate.  I fabricated four aluminum spacers and countersunk one end of each so that it will fit over the dimples in the floor.  I didn't get any pictures of it, but I then dimpled the floor and installed the fuel pump with some scrap hardware.  I need to order some AN509-8R12 hardware to mount it for good.



Categories:

« Worked on Fuel Pump Mounting | Main Index | Archives | Fabricated Fuel Line Between Pump and Firewall and Worked on Covers »

0 TrackBacks

Listed below are links to blogs that reference this entry: Installed Fuel Pump.

TrackBack URL for this entry: http://www.jasonbeaver.com/mt/mt-tb.cgi/555

Leave a comment