Finished SkyView Network Splitter
I finished the SkyView network splitter I started yesterday.
I used one male and one female connector on the output so that there can only be one way to hook these up (not that it really matters since they're electrically identical).
I used one male and one female connector on the output so that there can only be one way to hook these up (not that it really matters since they're electrically identical).
« Received Annunciator Control Circuits and Worked on Network Cables | Main Index | Archives | Worked on Avionics Wiring »
0 TrackBacks
Listed below are links to blogs that reference this entry: Finished SkyView Network Splitter.
TrackBack URL for this entry: http://www.jasonbeaver.com/mt/mt-tb.cgi/560
Leave a comment