Countersunk Canopy Screw Holes
I countersunk the screw holes in the canopy for #6 screws and then drilled the holes out with a 5/32" plexiglass bit to provide a little bit of room for the screws to move around. I also drilled out the corresponding holes in the canopy frame to #27.
« Did a Little Firewall Forward Work | Main Index | Archives | Worked on Canopy, Rear Window, and Final Tail Skin »
0 TrackBacks
Listed below are links to blogs that reference this entry: Countersunk Canopy Screw Holes.
TrackBack URL for this entry: http://www.jasonbeaver.com/mt/mt-tb.cgi/497
Leave a comment