Worked on Canopy Hinge Blocks

By Jason on July 24, 2010 9:32 PM | | Comments (0) | TrackBacks (0)
I clamped the C-617 canopy hinge blocks to the forward ribs and marked the forward holes with a #12 bit.  I then took the blocks off and drilled these to #10 on the drill press.



I then clamped the C-617 and C-618 blocks together and transferred the holes.



Categories:

« Started Canopy Hinge | Main Index | Archives | Worked on Canopy Hinges and Latch »

0 TrackBacks

Listed below are links to blogs that reference this entry: Worked on Canopy Hinge Blocks.

TrackBack URL for this entry: http://www.jasonbeaver.com/mt/mt-tb.cgi/445

Leave a comment