Canopy Seal Support Angles
I finished fabricating and drilling the outboard canopy seal support angles. These will support pieces of weatherstripping that the front edge of the canopy will close down against.
Here you can see that the seal support angle sits 1/8" below the flange of the subpanel. This provides a gap for the weatherstipping.
Here you can see that the seal support angle sits 1/8" below the flange of the subpanel. This provides a gap for the weatherstipping.
« Prepped Seats for Riveting, Canopy Seal Supports | Main Index | Archives | Worked on Forward Fuselage and Canopy Decks »
0 TrackBacks
Listed below are links to blogs that reference this entry: Canopy Seal Support Angles.
TrackBack URL for this entry: http://www.jasonbeaver.com/mt/mt-tb.cgi/401
Leave a comment