Fit Forward Fuselage Channels
Now that the skin was in place, I used some double stick tape to position the F-644 forward fuselage channels.
These were then match drilled to the top skin and sub panel.
I also match drilled the center channel attach clip to the channel and firewall.
These were then match drilled to the top skin and sub panel.
I also match drilled the center channel attach clip to the channel and firewall.
« Attached Instrument Panel and Forward Top Skin | Main Index | Archives | Finished Center Subpanel »
0 TrackBacks
Listed below are links to blogs that reference this entry: Fit Forward Fuselage Channels.
TrackBack URL for this entry: http://www.jasonbeaver.com/mt/mt-tb.cgi/367
Leave a comment