Priming Fuselage Components

I got in on the group buy for the Andair fuel pump and filter.  It took about 15 minutes or so to assemble the pump and speed controller to the mounting bracket.  This will get mounted just in front of the spar carrythrough between the seats.  The fuel filter is not pictured because Andair sent me the wrong one.  They've been great until now though, so I'm sure they'll take care of it in short order.



I used my self-etching primer to prime the overlap areas between the aft and center fuselage sections.  Since overspray cleans up easily with solvent, I didn't bother trying to mask off the area precisely.



I also finished deburring, dimpling, and priming the overlap areas on the center section.