Finished Drilling Flaps, Started Deburring

By Jason on October 7, 2009 11:01 PM | | Comments (0) | TrackBacks (0)
I drilled the flap brackets to the inboard ribs and spars, then disassembled the flap components for deburring.  I made it through most of the ribs before calling it a night.



Categories:

« Flap Brackets | Main Index | Archives | Deburred Flap Components »

0 TrackBacks

Listed below are links to blogs that reference this entry: Finished Drilling Flaps, Started Deburring.

TrackBack URL for this entry: http://www.jasonbeaver.com/mt/mt-tb.cgi/217

Leave a comment

About this Entry

This page contains a single entry by Jason published on October 7, 2009 11:01 PM.

Flap Brackets was the previous entry in this blog.

Deburred Flap Components is the next entry in this blog.

Find recent content on the main index or look in the archives to find all content.

Contact

Pages

Monthly Archives

Powered by Movable Type 4.1