Trap Doors and Tank Prep

| | Comments (0) | TrackBacks (0)
Both of the trap doors are finished and riveted to the second ribs.



I also deburred and dimpled the rivet holes on one of the skins.  There are a lot of holes in the tank skins since the rivets are placed closer together than on other skins.



0 TrackBacks

Listed below are links to blogs that reference this entry: Trap Doors and Tank Prep.

TrackBack URL for this entry: http://www.jasonbeaver.com/mt/mt-tb.cgi/140

Leave a comment

About this Entry

This page contains a single entry by Jason published on June 16, 2009 11:55 PM.

Trap Doors was the previous entry in this blog.

More Tank Prep is the next entry in this blog.

Find recent content on the main index or look in the archives to find all content.

Contact

Pages

Powered by Movable Type 4.1