Fabricated Tank Fuel Return Lines
I fabricated the tank fuel return lines. Since I may put an engine on at some point in the future that requires a high flow fuel return line, I'm running the same size return line as the supply line (3/8").
I unfortunately wasn't thinking about the location of the capacitive fuel sender plates when I drilled the holes for the return lines, so I had to modify the plates to provide room for the lines to run through. I kept the same clearance from the line as from the ribs/stiffeners.
The return line dumps fuel into the last bay so that hot fuel returned from the engine won't immediately be picked up and returned to the engine.
The return line dumps fuel into the last bay so that hot fuel returned from the engine won't immediately be picked up and returned to the engine.
0 TrackBacks
Listed below are links to blogs that reference this entry: Fabricated Tank Fuel Return Lines.
TrackBack URL for this entry: http://www.jasonbeaver.com/mt/mt-tb.cgi/150
Leave a comment