Trim Tab Rib
I fabricated the inboard trim tab rib. Just like the outboard one, it took two tries before I was happy with the fit. It's easy enough to make the paper template accurate, but it takes a bit of practice to determine where to start the bend so that it winds up in the right spot.
« Elevator Leading Edges and Trim Tab | Main Index | Archives | Finished Trim Tab and Fitting Control Surfaces »
0 TrackBacks
Listed below are links to blogs that reference this entry: Trim Tab Rib.
TrackBack URL for this entry: http://www.jasonbeaver.com/mt/mt-tb.cgi/97
Leave a comment