Horizontal Stabilizer Tip Fairings and Rudder Top Fairing

My buddy Andre stopped by again tonight to get a little experience with fiberglass.  We riveted and glassed the horizontal stabilizer tip fairings on which took all of about 15 minutes.



Since we have to wait for the epoxy to cure, we got started on the rudder top fairing.  Here, I'm checking the fit.  All of the fairings have needed a fair amount of trimming and sanding to fit properly.  It's easy, but it sure makes a mess.



After riveting the top fairing on, we glassed both sides.



Here is the tip with peel ply in place.  That's all I can do tonight since this all has to cure.